‘the G-dog by G-robots is a high performance four-leg robot that comes with a processing unit and motion editor. the robot comes with 9 command-type robot servos and each servo has its own command ID. more servos can be added using a hub and no complex wiring is required.’

 

 

‘command-type control servo contains a built-in CPU and since servos receive commands for speed and directions for each movement and operate according to the commands, there is less load on the processor. a built-in temperature sensor turns off power when servo temperature becomes too high.’

 

 

G dog by G robots

servo operation characteristics can be changed according to preferred speed and torque. all the servos are calibrated and have the same performance.’

you can find more on the G-dog at boing boing gadgets and hacked gadgets