AIRLAB 3D prints a delicate stainless steel pavilion in singapore's gardens by the bay
 

AIRLAB 3D prints a delicate stainless steel pavilion in singapore's gardens by the bay

commanding a prominent site in singapore‘s gardens by the bay, the team at AIRLAB has 3D printed a new temporary pavilion. titled ‘AIRMESH’, the space-frame structure is the materialization of five years of research on 3D printing in architecture, with the aim to achieve extreme lightness alongside optimized structural performance. assembled on site, the digitally-crafted belvedere is fully functional and open to visitors since the 30th of august, 2019.

AIRLAB 3D prints a delicate stainless-steel pavilion in singapore's gardens by the bay designboom

all images courtesy of AIRLAB SUTD

 

 

to achieve this ultimate lightness, the AIRLAB team chose a robust tetrahedral structural configuration, which is able to disperse the load through more than 200 linear elements converging in 54 parametric bespoke 3d printed nodes. the ethereal pavilion sits gently in a green slope in the bayfront area of gardens by the bay, contacting the ground in eleven points to minimize the stress. the overall form is a ‘convex hull’ generated from four direction vectors, connecting the visitors to four key views of the surroundings: the dragonfly river, the SG50 dome, the entrance path and the iconic rooftop of marina bay sands.

AIRLAB 3D prints a delicate stainless-steel pavilion in singapore's gardens by the bay designboom

 

 

the graceful structure is wrapped with two layers of white net which creates nuanced shades and filter the views, as well as materializing the projected LED lights at night. its visual lightness and thin materiality contributes to completely dematerialize the whole pavilion, and creates the essential contrast to frame the four selected views while letting the breeze and filtered sunlight permeate.

AIRLAB 3D prints a delicate stainless-steel pavilion in singapore's gardens by the bay designboom

 

 

‘as the first of its kind, it fosters singapore’s design and innovation edge. AIRMESH’s structural prowess pushes the limit of slenderness and therefore aims to inspire dare and curiosity in users.’ – carlos banon, lead designer and SUTD professor.

AIRLAB 3D prints a delicate stainless-steel pavilion in singapore's gardens by the bay designboom

 

 

the assembly of the structure of AIRMESH took only two days by five people, as a result of big technological innovation applied to the connection of the elements, being able to 3D print the threads inside the nodes to facilitate the assemblage with bolts concealed in the bars. only hex keys of different diameter are needed to assemble the entire pavilion.

AIRLAB 3D prints a delicate stainless-steel pavilion in singapore's gardens by the bay designboom

 

 

‘over five years, we have developed a system whereby any form can be conceptualised, fabricated and assembled by means of computer code created in our lab. it unlocks immense possibilities for future architectural designs like transportation hubs, large span roofs and even skyscrapers.’ – anna toh hui ping. lead researcher, AIRLAB SUTD.

AIRLAB 3D prints a delicate stainless-steel pavilion in singapore's gardens by the bay designboom

 

 

the system allows for tolerances of less than a millimeter and perfect fit of components, taking construction in stainless-steel to a next level of rapidity and performance. the structure has a weight of 700 kg, and despite its delicate and fine appearance, is able to withstand loads 16 times its weight – more than 11 tonnes. ‘with this new milestone, SUTD is proud to put singapore at the forefront of innovation in high performance 3D printing in architecture and structural design,’ – felix raspall, lead designer and professor at UAI.

AIRLAB 3D prints a delicate stainless-steel pavilion in singapore's gardens by the bay designboom

AIRLAB 3D prints a delicate stainless-steel pavilion in singapore's gardens by the bay designboom

AIRLAB 3D prints a delicate stainless-steel pavilion in singapore's gardens by the bay designboom

AIRLAB 3D prints a delicate stainless-steel pavilion in singapore's gardens by the bay designboom

AIRLAB 3D prints a delicate stainless-steel pavilion in singapore's gardens by the bay designboom

AIRLAB 3D prints a delicate stainless-steel pavilion in singapore's gardens by the bay designboom

 

 

project info:

 

project name: AIRMESH

location: gardens by the bay, singapore

design: AIRLAB SUTD

lead designers: carlos banon + felix raspall (directors of AIRLAB)

lead researcher: anna toh hui ping,

team: david rosen, vahid hasani, tay jenn chong, wang sihan, aurelia chan hui en, sourabh maheshwary, liu chi, lou qihuan, huang kunsheng, jona lim,ye jia jie, ramiah sivanandan, cheong yilei

 

designboom has received this project from our ‘DIY submissions‘ feature, where we welcome our readers to submit their own work for publication. see more project submissions from our readers here.

 

edited by: lynne myers | designboom

    have something to add? share your thoughts in our comments section below.
    all comments are reviewed for the purposes of moderation before publishing.

    comments policy
    LOG IN
    designboom's comment policy guidelines
    generally speaking, if we publish something, it's because we're genuinely interested in the subject. we hope you'll share this interest and if you know even more about it, please share! our goal in the discussion threads is to have good conversation and we prefer constructive opinions. we and our readers have fun with entertaining ones. designboom welcomes alerts about typos, incorrect names, and the like.
    the correction is at the discretion of the post editor and may not happen immediately.

    what if you disagree with what we or another commenter has to say?
    let's hear it! but please understand that offensive, inappropriate, or just plain annoying comments may be deleted or shortened.

    - please do not make racist, sexist, anti-semitic, homophobic or otherwise offensive comments.
    - please don't personally insult the writers or your fellow commenters.
    - please avoid using offensive words, replacing a few letters with asterisks is not a valid workaround.
    - please don't include your website or e-mail address in your comments for the purpose of self-promotion.
    - please respect jury verdicts and do not discuss offensively on the competition results
    (there is only one fist prize, and designboom usually asks renown professionals to help us to promote talent.
    in addition to the awarded designs, we do feel that almost all deserve our attention, that is why we publish
    the best 100-200 entries too.)

    a link is allowed in comments as long as they add value in the form of information, images, humor, etc. (links to the front page of your personal blog or website are not okay). unwelcome links (to commercial products or services of others, offensive material etc. ) will be redacted. and, ... yes, spam gets banned. no, we do not post fake comments.

    PRODUCT LIBRARY

    a diverse digital database that acts as a valuable guide in gaining insight and information about a product directly from the manufacturer, and serves as a rich reference point in developing a project or scheme.

    architecture news

    ×
    keep up with our daily and weekly stories
    492,115 subscribers
    - see sample
    - see sample