'the G-dog by G-robots is a high performance four-leg robot that comes with a processing unit and
motion editor. the robot comes with 9 command-type robot servos and each servo has its own
command ID. more servos can be added using a hub and no complex wiring is required.'



'command-type control servo contains a built-in CPU and since servos receive commands for speed
and directions for each movement and operate according to the commands, there is less load on
the processor. a built-in temperature sensor turns off power when servo temperature becomes too high.'



servo operation characteristics can be changed according to preferred speed and torque.
all the servos are calibrated and have the same performance.'

you can find more on the G-dog at boing boing gadgets and hacked gadgets